BRAIDED CABLE PULLING ROPES

A Manufacturer Specializing in Braided Ropes. Type of Ropes we make: Kevlar®, Dyneema®, Technora®, Dacron® ...

BRAIDED CABLE PULLING ROPES
Also Boom Truck Winch Lines
and Stringing Lines
Composite Fiber Ropes
Dyneema Fiber Ropes

These HIGH FORCE braided ropes are sold throughout then U.S. and are preferred by the experienced professionals. Largest Selection Available.

Longer Lasting Rope
Higher Strength Rope
Easier Handling Rope
Made in the USA
Manufacturer Direct to You!
White with Green Markers Rope

CABLE PULLING ROPE
HIGH FORCE COMPOSITE
DOUBLE BRAID

With shock absorption properties similar to nylon and a higher tensile strength than either nylon or polyester, this rope offers even balance and excellent resistance to abrasion, sunlight and most common chemicals.

ROPE DIA

ROPE
PART NO.

AVG. BREAK
STRENGTH (lbs)

WORK LOAD LIMIT* (lbs)

WEIGHT Per 100 ft (lbs)

1/4"

4N-080

2,600

650

1.9

3/8"

4N-120

6,200

1,550

4.7

1/2"

4N-160

10,050

2,510

7.6

9/16"

4N-180

12,285

3,070

9.5

5/8"

4N-200

15,320

3,830

12

3/4"

4N-240

25,730

6,430

16.6

7/8"

4N-280

30,150

7,535

23.7

1"

4N-320

40,200

10,050

31

1-1/8"

4N 360

49,925

12,525

36.1

Ropes available in 300ft, 600 ft. and 1,200 ft. reel lengths.
Longer lengths available.
Professional hand-spliced eye – both ends.
All spliced eyes include chafe guards
Urethane coating available. Call for a quotation

URETHANE COATING PROVIDES EXTRA ABRASION RESISTANCE AND
IS AVAILABLE IN THE FOLLOWING COLORS:

Clear • Green • Orange • Blue • Red • Yellow • Grey

DIELECTRIC MATERIAL PERMITIVITY

Tests performed by an independent laboratory to ASTM F1701-96 (5 minutes at 100 KVAC) confirm these ropes exhibit good resistance to electric conductivity when in a NEW and DRY condition. However, rope fouled with dirt, moisture, absorbed water or other contaminants will greatly increase the potential for electrical conduction. WARNING: Use great caution when exposing these ropes to live current, particularly when wet.

CABLE PULLING ROPE
HIGH STRENGTH TECHNORA® 12-STRAND

ROPE DIA	ROPE PART NO.	AVG. BREAK STRENGTH (lbs)	*WORK LOAD LIMIT (lbs)**	WEIGHT Per 100 ft (lbs)
3/16"	7TP-060	5,500	1,375	1.30
1/4"	7TP-080	8,000	2,000	2.20
5/16"	7TP-100	13,000	3,250	3.30
3/8"	7TP-120	18,000	4,500	4.40
7/16"	7TP-140	27,000	6,750	6.60
1/2"	7TP-160	32,000	8,000	8.20
9/16"	7TP-180	40,000	10,000	10.60
5/8"	7TP-200	48,000	12,000	13.00

ROPE COMPARISON:
TECHNORA® vs. STD. COMPOSITE

DIA.	FIBER	STRENGTH	WEIGHT Per 100 ft (lbs)
5/8"	COMPOSITE	15,320 LBS.	12.00 LBS.
3/8"	TECHNORA	18,000 LBS.	4.40 LBS.

DYNEEMA: Strongest fiber available, Minimal Stretch,
Abrasion Resistant, Urethane Coated

PELICAN ROPE WORKS
4001 W. Carriage Dr. Santa Ana, CA 92704
Local: 714-545-0116 Fax: 714-545-ROPE (7673)
Toll Free: 888-860-ROPE(7673)
sales@pelicanrope.com