BRAIDED CABLE PULLING ROPES
Also WINCH LINES
and STRINGING LINES
Composite Fiber Ropes
Dyneema Fiber Ropes
These HIGH FORCE braided ropes are sold throughout then U.S. and are preferred by the experienced professionals. Largest Selection Available.
- Longer Lasting Rope
- Higher Strength Rope
- Easier Handling Rope
- Made in the USA
- Manufacturer Direct to You!
- White with Green Markers Rope
|
 |
CABLE PULLING ROPE
HIGH FORCE COMPOSITE
DOUBLE BRAID
With shock absorption properties similar to nylon and a higher tensile strength than either nylon or polyester, this rope offers even balance and excellent resistance to abrasion, sunlight and most common chemicals.
ROPE DIA |
ROPE
PART NO. |
AVG. BREAK
STRENGTH (lbs) |
WORK LOAD LIMIT* (lbs) |
WEIGHT Per 100 ft (lbs) |
1/4" |
4N-080 |
2,600 |
650 |
1.9 |
3/8" |
4N-120 |
6,200 |
1,550 |
4.7 |
1/2" |
4N-160 |
10,050 |
2,510 |
7.6 |
9/16" |
4N-180 |
12,285 |
3,070 |
9.5 |
5/8" |
4N-200 |
15,320 |
3,830 |
12 |
3/4" |
4N-240 |
25,730 |
6,430 |
16.6 |
7/8" |
4N-280 |
30,150 |
7,535 |
23.7 |
1" |
4N-320 |
40,200 |
10,050 |
31 |
1-1/8" |
4N 360 |
49,925 |
12,525 |
36.1 |
- Ropes available in 300ft, 600 ft. and 1,200 ft. reel lengths.
- Longer lengths available.
- Professional hand-spliced eye – both ends.
- All spliced eyes include chafe guards
- Urethane coating available. Call for a quotation
URETHANE COATING PROVIDES EXTRA ABRASION RESISTANCE AND
IS AVAILABLE IN THE FOLLOWING COLORS:
Clear • Green • Orange • Blue • Red • Yellow • Grey
|
Tests performed by an independent laboratory to ASTM F1701-96 (5 minutes at 100 KVAC) confirm these ropes exhibit good resistance to electric conductivity when in a NEW and DRY condition. However, rope fouled with dirt, moisture, absorbed water or other contaminants will greatly increase the potential for electrical conduction. WARNING: Use great caution when exposing these ropes to live current, particularly when wet. |
CABLE PULLING ROPE - HIGH STRENGTH DYNEEMA 12-STRAND
ROPE DIA |
ROPE
PART NO. |
AVG. BREAK
STRENGTH (lbs) |
WORK LOAD LIMIT* (lbs) |
WEIGHT Per 100 ft (lbs) |
3/16" |
7D-060 |
5,500 |
1,375 |
1.00 |
1/4" |
7D-080 |
8,400 |
2,100 |
1.70 |
5/16" |
7D-100 |
13,200 |
3,300 |
2.60 |
3/8" |
7D-120 |
19,000 |
4,750 |
3.60 |
7/16" |
7D-140 |
23,800 |
6,000 |
4.60 |
1/2" |
7D-160 |
31,000 |
7,800 |
6.50 |
9/16" |
7D-180 |
38,000 |
10,000 |
8.00 |
5/8" |
7D-200 |
51,000 |
12,750 |
10.00 |
ROPE COMPARISON:
DYNEEMA vs. STD. COMPOSITE
DIA. |
FIBER |
STRENGTH |
WEIGHT Per 100 ft (lbs) |
5/8" |
COMPOSITE |
15,320 LBS. |
12.00 LBS. |
3/8" |
DYNEEMA |
19,000 LBS. |
3.5 LBS. |
DYNEEMA: Strongest fiber available, Minimal Stretch,
Abrasion Resistant, Urethane Coated |
